|
|
Steam boiler burning fytomass waste
Plot, Rostislav ; Skála, Zdeněk (advisor)
This thesis deals with the calculation of the boiler on stillage. Nowadays, when there's fossil fuels are just biomass seems adequate compensation. The great advantage of biomass boilers is a small amount of emissions, especially the greenhouse gas CO2. Of a given fuel composition is made thermal calculation and dimensioning of heat transfer surfaces of steam boilers. The resulting calculation must follow the parameters of steam at the outlet from the boiler.
|
|
|
Tyre Temper. Meauserement on Moving Vehicle with Use of Infrared Pyromether OS100
Morávek, David ; Rasch, František (referee) ; Blaťák, Ondřej (advisor)
Bc. David Morávek Tyre temperature measurement on moving vehicle with of infrared pyrometer OS100 MT, IAE, 2008, page 70, picture 41 Problemacy of recording the temperature and tyre pressure on driven car is processed in this diploma work. Suitable measuring chain was set up. Censor holders for this type of measurement were designed and produced. Driving exams and tests are depicted in this work, too. We came to the conclusion that tyre temperature depends on lengthways and transverse acceleration of the car and also on it’s load.
|
|
| |
|
|
Monitoring differential pressure of filters
Vacek, Jiří ; Kratochvíl, Petr (referee) ; Hammer, Miloš (advisor)
In this bachelor thesis is at first dealt with pressure, pressure, manometers, technical diagnostics and monitoring. In next part is analysis of methods of particle filters on basis of published academical papers. Following part introduces reader with current state of filter monitoring in production areas of BOSCH DIESEL ltd. and continues with choosing of pilot area for application of differential pressure monitoring method and designs solution itself. In the last part of the thesis is simple financial analysis and roll-out ideas for this method.
|
|
|
Design and realization of the pull strength measuring device for SMD
Valíček, Jan ; Klíma, Martin (referee) ; Otáhal, Alexandr (advisor)
This thesis deals with the design and implementation of a device for measuring pull strength by surface mounted devices (SMD). It analyzes the theory of pull strength testing of solder joints with emphasis on standard IEC 62137-1-3 and describes the selection of components utilized to create mechanical construction and electrical parts. These electronic parts made or innovated in this work were control system based on microcontroler Atmega164P, power circuit for stepper motor and communication of measure equipment TEST 321 with PC. The whole design is complemented by simulation of mechanical stress to the critical components using ANSYS. The conclusion summarizes the most important parameters of this equipment.
|
|
|
Design of Flow, Temperature and Pressure Measuring System
Macíček, Ondřej ; Čížek, Martin (referee) ; Sekora, Jiří (advisor)
This master’s thesis contains complete design of the complex measuring system for temperature, pressure and flow. Objects of measuring are pressure in rabbit’s heart ventricle, flow of the saline through the heart and the temperatures of physiological solution. Work is interested in programming of microcontroller and program for LabVIEW environment, which is used to view and export relevant data related to measuring. Text also contains technical documentation of functional sample of measuring system.
|
|
|
Altitmeter for RC aircraft models
Švec, Jan ; Frýza, Tomáš (referee) ; Prokopec, Jan (advisor)
The aim of my bachelor thesis is to design a altimeter, who uses to record the attitude of the model "RC plane" evaluation of the current atmospheric pressure. The data are storaged during the flight into memory. Data can be after the recording through the USB transferred to the PC store. The software on the PC communicates with the device and ensuring the conversion of recorded pressure to altitude RC model.
|
|
|
Aircraft air-conditioning systems
Lednický, Ondřej ; Horák, Marek (referee) ; Třetina, Karel (advisor)
The bachelor thesis is focused on the aircraft air-conditioning systems, their functions and basic tasks needed for a safe and comfortable flight. The thesis is divided into several chapters: the first one deals with the most important factors influencing human health. Next chapter is focused on a description of the assurance of main components which are composing the aircraft air-conditioning system. Final chapter of the thesis deals with oxygen systems, which are essential for the survivor of the passengers in the case of an accident.
|
|
|
Evaluation of pressure conditions in the quenching chamber of low-voltage device
Nevrzal, Filip ; Vávra, Daniel (referee) ; Valenta, Jiří (advisor)
In this master’s thesis there is firstly conducted research about pressure measurement. Next there is mathematical description of thermodynamic conditions in used testing chamber by using magnetohydrodynamic and Maxwell equations. Next chapter deals with testing chamber itself, more precisely with function, model and changes done to it. In practical part there are data measured by used sensors, which are also closer described in this chapter. In next chapter there is comparison of reaction times of used sensors and their frequency specters, obtaining using fast Fourier transformation. Second to last chapter introduces very measurement on the real device and in the last chapter these data are analyzed and more closely described.
|
|
|
Optimisation of pressure condition in water supply systems
Sucháček, Tomáš ; Svoboda,, Miroslav (referee) ; Pollert, Jaroslav (referee) ; Tuhovčák, Ladislav (advisor)
This thesis is focused on the optimization of pressure conditions in the water supply network. There is a deep theoretical and critical search of the state of the art and there are fields where there is an insufficient field of knowledge, the so-called "knowledge gap". Experiments are proposed here to determine the dependence of water consumption on pressure conditions. There is a description of experiments and way how it was carried out, which were carried out on the water connection, in the pressure zone and in the laboratory on the hydraulic loop. There is proposed a methodology of experimental determination of the mathematical dependence of water consumption on pressure so that it can be used for optimization problems, where consumption is considered as an optimization criterion. The results of individual experiments are evaluated and a critical discussion of the achieved results is carried out. Finally, the achieved results are compared with the values found in a deep literature search.
|
guest ::
